International Virtual Course in Metallurgy 2021
Introduction
Department of Metallurgical Engineering, Faculty of Mining and Petroleum Engineering ITB, in collaboration with Aalto University-Finland and Central South University-China, proudly announces and invites you to join The International Virtual Course in Sustainable Process Metallurgy 2021.
This course will cover science and technology underpinning the production of metals from raw ores and electronic wastes by using high and low-temperature processes. This course discusses the principles of metal production by using pyrometallurgy, hydro-electrometallurgy, and also recycling. The fundamentals of metallurgical processes such as thermodynamics will also be addressed. This course will cover the extraction of Cu, Ni, Sn, Zn, Pb, rare earth metals, and WEEE recycling (Waste Electrical and Electronic Equipment) using metallurgical methods and microbes. Rare earth metals utilization for advanced technology will be covered as well.
Why you should join this course?
Lecturers from three different nations will share the uniqueness of metal production technology.
[1] Finland is well known for its copper technology and the professor from Aalto University will teach us how to produce copper.
[2] China is the world-leading metal producer and therefore we will learn how to produce zinc and lead and know the present state of WEE recycling there by the expert from Central South University.
[3] Indonesia is widely recognized for smelting technology for its lateritic nickel and tin ore and thus, it’s good to learn how to process them directly from the experienced lecturers from Bandung Institute of Technology and industries.
[4] Indonesia has the potential to process Rare Earth Metals. The processing and application of REE for advanced technology will be discussed.
[5] The processing of nickel lateritic ore using hydrometallurgy routes will be delivered.
[6] Participants who satisfy the requirements will receive an E-transcript worth three credits at the end of the course (only for students from ITB, ITB Partner universities, or those from the Sasrabahu program).
Topics
This course will discuss:
- Introduction and Fundamentals of Metallurgical Process
- Metals and Sustainability
- Production of Cu, Ni, Sn, Pb, Zn, and Rare Earth Metals Using Pyrometallurgy and Hydrometallurgy.
- Metals Recycling from E-Waste.
- Metals Recycling Using Microbes.
- Principle of Physical Separation for Primary and Secondary Resource.
Eligible Participants
This course is free for students from all around the world!
- Undergraduate students
- Graduate students
- Non-students/Professional (Fee: IDR 3,000,000)
Participants can apply for this program through the following pre-registration link.
Students are required to provide a motivation letter (maximum two paragraphs), student ID card, recent photograph, and most recent academic transcript (mandatory ONLY for students from local universities) to apply for this course.
Schedule
The online course will be held in four weeks from August 2nd – 31th, 2021 via VooV meeting at 2:00-4:00 pm (GMT+7).
Important Dates
- Open Registration: June 12, 2021
- Registration Deadline: July 25, 2021
- Selected Participant Announcement: July 28, 2021
- Program First-day: August 2, 2021
Course Content
Introduction and Fundamentals
Introduction, Metals Production and Sustainability
August 2 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
D.Sc.(Tech.).Imam Santoso, S.T., M.Phil. and Prof. Pekka Taskinen
Metals Production and Sustainability (cont)
August 3 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Prof. Pekka Taskinen
Ellingham and Kellog Diagram, Energy Balance
August 4 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Prof. Pekka Taskinen
Binary and Ternary Diagram
August 5 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
D.Sc.(Tech.).Imam Santoso, S.T., M.Phil.
Examples of Thermodynamic Applications in Industries
August 6 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Assoc. Prof. Xia Longgong
Production of Cu and Ni
Production of Copper: Matte Making
August 9 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Prof. Pekka Taskinen
Production of Copper: Converting and Direct to Blister
August 11 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Prof. Pekka Taskinen
Production of Nickel: Nickel Matte
August 12 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Prof. Pekka Taskinen
Production of FeNi from Laterite Ore: RK-EF Technology
August 13 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Dr.-Ing. Zulfiadi Zulhan, S.T., M.T.
Production of Nickel by Hydrometallurgy I
August 16 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Prof. Dr. mont. Zaki Mubarok, S.T., M.T.
Production of Nickel by Hydrometallurgy II
August 18 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Prof. Dr. mont. Zaki Mubarok, S.T., M.T.
Production of Sn, Zn, Pb, and REE
Production of Tin by Pyrometallurgy
August 19 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Wiyono S.T.
Processing & Application of REE for Advanced Technology
August 20 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Prof. Ir. Syoni Soepriyanto, M.Sc., Ph.D.
Production of Zinc
August 23 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Assoc. Prof. Xia Longgong
Direct Smelting of Lead Sulfide
August 24 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Assoc. Prof. Xia Longgong
Recycling
WEEE Recycling in China
August 25 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Assoc. Prof. Xia Longgong
Principle of Physical Separation for Primary & Secondary Resources
August 26 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Assoc. Prof. Ir. Edy Sanwani, M.T., Ph.D.
Recycling of Metal Waste Using Microbes
August 27 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Assoc. Prof. Ir. Siti Khodijah Chaerun, M.T., Ph.D.
Recycling of Batteries
August 30 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
Taufiq Hidayat, S.T., M.Phil., Ph.D.
Closing and Assignment
August 31 , 2021 / 02.00 PM – 04.00 PM (GMT+7)
D.Sc.(Tech.).Imam Santoso, S.T., M.Phil.
Participant Requirements and Benefits
- Expected to attend at least 70% of all classes.
- Required to engage with assignments sessions.
- Will be required to submit mandatory coursework and will receive an evaluation for their work.
- Undergraduate students are entitled to an E-transcript equivalent to 3 credits by the end of the course (only for ITB, ITB Partner universities, or those from the Sasrabahu program).
- Will receive an E-certificate of participation by the end of the course.
- Will be given lecture notes and materials.
Invited Lecturers
Prof. Pekka Taskinen
Emeritus Professor, Department of Chemical and Metallurgical Engineering, Aalto University
Finland
Assoc. Prof. Xia Longgong
Associate Professor, School of Metallurgy and Environment, South Central University
China
Wiyono S.T.
Head of Metallurgy Unit, PT Timah
Indonesia
Program Lecturers
Prof. Ir. Syoni Soepriyanto, M.Sc., Ph.D.
Head of Metallurgical Engineering Research Group, FTTM-ITB
Indonesia
Assoc. Prof. Ir. Edy Sanwani, M.T., Ph.D.
Head of Mineral Processing Laboratory, Department of Metallurgical Engineering, Bandung Institute of Technology
Indonesia
Prof. Dr. mont. Zaki Mubarok, S.T., M.T.
Head of Hydro-Electrometallurgy Laboratory, Department of Metallurgical Engineering, Bandung Institute of Technology
Indonesia
Assoc. Prof. Ir. Siti Khodijah Chaerun, M.T., Ph.D.
Head of Metallurgical Engineering Study Program, Department of Metallurgical Engineering, Bandung Institute of Technology
Indonesia
Dr.-Ing. Zulfiadi Zulhan, S.T., M.T.
Head of Pyrometallurgy Laboratory Department of Metallurgical Engineering, Bandung Institute of Technology
Indonesia
Taufiq Hidayat, S.T., M.Phil., Ph.D.
Lecturer, Department of Metallurgical Engineering, Bandung Institute of Technology
Indonesia
D.Sc.(Tech.).Imam Santoso, S.T., M.Phil.
Lecturer, Department of Metallurgical Engineering, Bandung Institute of Technology
Indonesia
Contact Us!
IVC@metallurgy.itb.ac.id
Contact Person:
+62 812-1939-7321 (Fauzi)
University Partner
Supported by
